How to Get a Straight Pipe for a Truck?

By clearing obstructions from your exhaust system, you can improve horsepower by allowing exhaust gas to flow more freely. Many people install a straight pipe in their truck or truck to completely replace catalytic converters because of their limitations. If you live in a state where this isn’t legal, you shouldn’t have any issues as long as you only use the truck for drag racing.

Do you know how to straighten an exhaust pipe?

In order to straight pipe a truck, the old exhaust pipe must be taken out and replaced with a new straight pipe. Additionally, the exhaust gas is discharged differently than before as a result of this.

A truck’s exhaust pipe can be strengthened very easily. There are no intricate plans for this. Even someone who is unable to weld and is only capable of using basic screwdrivers, reciprocating saws, and other hand tools can install an exhaust pipe. 

We can say that if you can gather these tools and have some confidence, you can strengthen the pipe on a truck at your home because it is a simple task to complete and doesn’t require large tools.

Tools Needed for Straight Pipe On A Truck

You may be contemplating the tools needed while considering the straight pipe on your truck. To help you out in this process, we’ve also put together a list of the tools you’ll need. Although very common, you might not have access to these tools at home.

You will need both large and small tools because you will be working on an iron pipe and may need to join one iron to another. In the previous section, we already informed you of the tools. Nonetheless, I’ll say it again in hopes of your assistance.

• Pipe
• Reciprocating Saw
• Screwdriver
• Tape Measure
• Welding Machine

How to Get a Straight Pipe for a Truck

Although straight piping a truck is not particularly challenging, it does necessitate some basic mechanical expertise. To complete the installation, a few hand tools would also be needed.

Therefore, the steps below would walk you through each step of straight piping a truck at home.

Step 1: Checking the Current Pipe

You must check the exhaust system’s existing pipe as a first step. Different trucks have pipes that are made of different materials and in different ways.

By properly inspecting the existing pipe, you can quickly determine what kind of pipe the system needs.

Primarily, the inspection’s objective is to identify the best cutting locations. Never, under any circumstances, place the spot close to the catalytic converter.

Step 2: Ascertain the Accurate Size of the Muffler

When installing a straight pipe on a truck, it is important to first determine the type and size of the vehicle’s necessary muffler. In order to guarantee the avoidance of backflow in the exhaust system, the muffler’s capacity is crucial. A pre-silencer and a straight-line muffler with a straightforward flow should be included in the entire kit.

Step 3: Detaching the Existing Pipe

There are two ways to take the pipe out, depending on the attachment type. To remove the pipe, unscrew any nuts holding it to the exhaust system. However, some pipes have joints that are welded. The pipe must then be severed from the exhaust system using a reciprocating saw. Other parts, such as the catalytic converter, must be removed during the cutting process.

Step 4: Shaping the New Pipe

Recall the measurement you were asked to take in the previous step. Cut the new aftermarket pipe you purchased using that measurement. It would be best to cut it straight since you are straight piping the vehicle. If you are unable to cut the pipe straight, however, you are free to use any type of cut you like. A minimum amount of bending is preferable for the pipe.

What Advantages Can Straight Piping a Truck Have Over Welding?

No electric consumption

The metals are never melted by electricity in the non-welding process, and only a small amount of power is required to join two joints. Furthermore, you can use the higher stored electric current for other things because it still exists. 

In this way, the price will be lower, and you can make a small financial saving on each of these activities. 

No welding problems

Electric shocks from the welding machine can harm the human body and lower the necessary voltage levels. The welding electrode is still hot and can cause an immediate skin wound. Your truck might also start to sound like a jet.

Maximum sound production

The joining points are typically free of minor attachments and the procedure typically does not involve metal heat melting.  It occurs as a result of the pipeline’s uniformity and smooth appearance.

The Average Cost For Straight Pipe Kits for 2022

You must purchase a straight pipe for the installation. For various models, quality levels, and price points, there are various types of pipes. You must select the item with the best value. Quality should never be sacrificed for cost. You can have a normal pipe in any auto shop or online shop at an average price of $250 to $800.

Any aftermarket retailer has it for sale. where you can purchase it for less money. However, you must spend more than $1,000 if you want a titanium pipe of high quality. Consider using a stylist twin pipe. It will cost you around $600 to $900. Your truck will look fiercer with twin pipes. Select the best straight pipe exhaust kits if you have the money.

Conclusion

For my own part, I wouldn’t install straight pipe exhaust in my truck! Why is this, you ask? I think it’s because the drawbacks of making your truck unusable on public roads simply outweigh the advantages of increased volume and strength.

Sadly, this wouldn’t help me reach my goal of having a truck that is fun to drive both on the track and on the way home. But if you’re driving a track-only vehicle, go ahead!