How to Load and Transport a Motorcycle into a Truck?

Read Time:8 Minute, 39 Second

The ideal spot to transport motorcycles is in your pickup’s seat. However, there are several ways to transport a motorcycle by truck in order to carry out this work securely and safeguard your motorcycle. The most practical method will be presented in this tutorial! The motorcycle is challenging to load and unload on your own. You can enlist a friend’s assistance to safeguard you and your motorcycle.

Table of Contents

Can You Put the Motorcycle on the Truck Seat?

Generally speaking, most motorcycles can be installed on the truck base. According to experience, the longer the truck seat, the smaller / lighter the motorcycle, the easier it is to load onto the seat. But it must also be mentioned that not all trucks are compatible with motorcycle. Whether a motorcycle can be towed by a truck depends on some important factors, as follows:

Size and weight of motorcycle
Capacity and size of truck base
Do you want to close the tailgate
How much equipment do you want to carry on the motorcycle

Can You Safely Load and Unload the Motorcycle on Truck?

One of the most important factors is the size of the motorcycle and truck base. Home made motorcycles are usually hauled on truck beds, which is no accident. These machines are like small caliber Street motorcycles, small in size and light in weight, which means that they are suitable for most card lathes. At the other end, you can find large cruisers and travel cycles, such as Honda golden wings and flagship Harley cruisers. Because these motorcycles are about 8-9 feet long and extremely heavy, they are difficult to transport by truck. Even if the motorcycle can be towed by a full-size truck, it is not convenient.

How to Transport Motorcycle by Truck in a Simple Way?

Method 1: Use the Slope on the Road

For me, this is one of the most important steps to load motorcycle. Depending on how you complete this step, you can make climbing by motorcycle very difficult or simple. Why is this important? Because when you find a slope, you can raise the height of the truck base. This will reduce the slope angle and allow you to push the motorcycle with less force.

There are many ways you can find a slope. look around. Usually, you will find the low point at the intersection of the street edge and the lane edge. The road is arched at the intersection to facilitate the drainage system. You can pull the rear wheels of the truck to that point. Make sure that the parking brake is set so that the truck will not move.

There may not always be such a tendency. However, you can do your own things around some things. Park the truck near any mound. This is an inclined path. You can put down the motorcycle instead of pushing it up.

Now, if you load motorcycle without a ramp, you may consider using other things. But to your surprise, nature may be helpful in this regard. Hills, driveways, loading platforms, etc. can help you load. If you have a hill to choose from, use it. I’m not talking about those high heels you like. This is just a very tall thing, a bit like the height of a truck bed.

If you want to use the ramp, you can put the loading truck in front of it. Now compare the height of the hill and the truck base. If they are accurate or almost the same, then you are lucky! All you need to do is put your motorcycle on the top of the mountain, gently move it, and hold the handle tightly. Open the truck base and move the motorcycle into it. If the two heights don’t match, don’t worry. Use something that matches the height. If your hill is a little lower than the bottom of the truck, use a box between them. When you remove the motorcycle from the mountain, this box will help you keep up with the height of bed. On the other hand, if your mountain is higher than a truck, I suggest you don’t use that mountain.

Method 2: Lift by Yourself

OK, so you don’t have any mountains available. don’t worry. You can still transport motorcycles without ramps. If you are strong enough to bear the weight of motorcycle, you can realize your potential.

To load the motorcycle by yourself, you need:

You can put the motorcycle handle on the left so that it won’t roll.
Hold the right handle and axle tightly and lift the motorcycle. Lift the front tires into the truck body.

Make sure you are still in the same position. Hold the motorcycle as steady as possible. Once you slip, your motorcycle will turn over, causing great damage. Now, hold the correct handle and axle, lift the motorcycle again, and put the middle part on the bed. Make sure that your motorcycle’s skateboard and engine case are placed on the truck base.

Finally, you need to lift your rear tire. Induction motor. In this way, you can use your energy to move your entire motorcycle. This method is convenient for those who have a light motorcycle or are strong enough. Besides, be careful of your back when doing this. A little coldness will make your back ache all your life.

How to Load and Transport a Motorcycle into a Truck

Method 3: Make a Ramp

If these methods are not good, the last general method can be used. Now you don’t have a slope. Make a slope yourself. Use hard wood blocks or decks.

You must check whether your ramp is strong enough to accommodate your motorcycle. Compare the width and check whether your motorcycle is suitable. If you feel everything is right, you are free to use your ramp.

Step 4: Load the Motorcycle

Now that the preparations have been completed, it is time for the last battle. You need to load the motorcycle. If the motorcycle is very light, like a dirt truck or a sports motorcycle, you can almost move it by hand. For heavy motorcycles such as station wagons or cruisers, you are welcome to use a small number of engines.

If you talk about personal preferences, I think it’s better to push motorcycle by yourself. In this way, the motion and speed are predictable and controllable. If you set the ramp correctly, the loading process will be easier than it sounds.

Of course, we are talking about separately loading the motorcycle. If someone nearby is very friendly, please help. There is nothing to be ashamed of accepting the help of friends. If you decide to use some motor power, you can climb the slope and keep the throttle and clutch open. Motorcycle will assist in loading to a certain level. In some special cases, you need the horsepower of motorcycle. If you want to load a motorcycle into a moving truck, you must sit on the motorcycle and cross the ramp.

What Else Do I Need to Do to Prepare Motorcycle for Transportation?

In addition to protecting your motorcycle, you also need to make sure that all liquids are filled and the battery is fully charged. You should also check the tire pressure and inflate the tire to its maximum capacity if possible. By taking these simple steps, you can help ensure that your motorcycle is ready for transportation.

With these useful tips, loading a motorcycle onto a truck is not necessarily a difficult task. By following these simple steps, you can help ensure that the motorcycle is fully protected and will not be damaged during transportation. With some planning and preparation, you can safely transport your motorcycle to any place you need.

Tips on Easy Loading & Security

Be patient: don’t run on the ramp. High speed entry on the ramp can remove the end of the ramp from the truck base. On the contrary, when you climb on the motorcycle, slow down but be firm.

Ramp positioning: Some people tend to keep two narrow ramps side by side to form a wider ramp. Unless you connect them together, this method is risky. When you start climbing, they will separate due to weight, and the front wheels will fall. It is best to use narrow ramps at a distance.
Chassis clearance: Make sure there is enough clearance at the bottom of the motorcycle. If the clearance of motorcycle is very low, when you climb, the abdomen of motorcycle will hit the tailgate of the truck. If this happens, you need a longer slope and a more tolerant angle.
Keep balance: When you tighten the belt, make sure to keep balance between too loose or too tight. One way to understand balance is to tighten the belt until the suspension is compressed by half. Any tighter may cause damage suspension, and any looser may cancel the purpose of tying.
Stay sane: YouTube is full of failed videos about people trying to ride a motorcycle to a lathe without thinking. Usually, this is a high-risk method. If you need some motor power, please use clutch / throttle control.

Use of fillers: strapping may cause motorcycle scratches. To avoid this, you can use thick paper or soft towels as fillers. If you have to make your ramp side by side with the motorcycle, be sure to put a blanket between them.

Conclusion

It will be really simple to use pickup trucks to transport motorcycles if you apply the right techniques and equipment. Otherwise, any vehicle will eventually sustain damage from new users. Asking a friend who has experience loading motorcycles onto trucks will usually be the best option. Now, if you complete the procedure step-by-step without missing a beat, you ought to be able to mount your motorcycle on the truck with ease.

Learn more about how to transport the following items together!

InLoad Motorcycle, Motorcycle, Transport Motorcycle